Ruler

Ruler 300 mm or 12 inch

 

 

The MUDTEST rulers are made from stainless steel. Lengths, depths, and heights can be measured with it. The ruler has scales on both sides. One scale can be uses to measure from 0 to 300 mm with a division of 0.5 mm and the zero point being at one of the extreme ends of the ruler. The scale on the other side can be uses to measure from 0 to 12 inch with a division of 1/16 and 1/10 inch.

MUDTEST rulers corresponds to the standard specifications of EN 12350-1. Because it is made of stainless steel, it is not attacked by cement paste and is therefore particularly well suited for examining fresh concrete.

In addition to distance measurements as part of the investigations from the EN 12350 series of standards, MUDTEST rulers can also be used for tests of drilling fluid using the API filter press. The thickness of the filter cake can be measured easily as the zero point being at one of the extreme ends of the ruler. Therefore the requirements of API RP 13B-1 or the corresponding international EN ISO 10414 are being matched.

Finally, it is also suitable for measuring the slump of grout according to EN 445.

 

 

Ruler stainless steel 300 mm / 12“ 3900.00.00300

 

 


 

 
 

MUDTEST Sp. z o.o.
Chełmońskiego 77
32-500 Chrzanów / Poland

+48 516 589 676
Activate Javascript

Since the 1950’s LEUTERT is manufacturing and trading instruments for testing the physical and chemical properties of drilling fluids and cement slurries. The testing equipment was originally developed and sold under our oil and gas division. Over the years water well construction and civil engineering companies, bridge, road and tunnel builders also became our customers. Funding MUDTEST Sp. z o.o. was the logical consequents to serve our new customers better. MUDTEST remains part of the LEUTERT group. Therefore our customers will receive the same high quality products they are used for over the last 70 years.